OEM China Rotary Crawler Mounted Hydraulic Surface Down-The-Hole Drilling Rig Rotary
latela konteraka”, e tsamaellana le tlhokeho ea mmaraka, e kenelletseng nakong ea tlholisano ea mebaraka ka boleng ba eona bo holimo hape e fana ka litšebeletso tse felletseng le tse ikhethang bakeng sa bareki ho ba lumella ho fetoha bahloli ba bohlokoa.Ho phehella khoebo, ka 'nete ke thabo ea bareki bakeng sa OEM China Rotary Crawler Mounted Hydraulic Surface Down-The-Hole Drilling Rig Rotary, Lintho tsa rona li rometsoe Amerika Leboea, Europe, Japane, Korea, Australia, New Zealand, Russia le linaha tse ling.Ke lebelletse ho etsa tšebelisano e ntle le e tšoarellang nako e telele le uena molemong o tlang!
latela konteraka”, e tsamaellana le tlhokeho ea mmaraka, e kenelletseng nakong ea tlholisano ea mebaraka ka boleng ba eona bo holimo hape e fana ka litšebeletso tse felletseng le tse ikhethang bakeng sa bareki ho ba lumella ho fetoha bahloli ba bohlokoa.Ho phehella khoebo, ka sebele ke ho khotsofatsa bareki bakeng saChina DTH, mochini oa ho phunya, Re ikemiselitse ho aha lebitso le tummeng le ka susumetsang sehlopha se itseng sa batho le ho khantša lefatše lohle.Re batla hore basebeletsi ba rona ba hlokomele ho itšepa, ebe ba fumana tokoloho ea lichelete, qetellong ba fumane nako le tokoloho ea moea.Ha re tsepamise maikutlo tabeng ea hore na re ka etsa leruo le le kae, ho e-na le hoo re ikemiselitse ho fumana botumo bo phahameng le ho tsebahala ka thepa ea rona.Ka lebaka leo, thabo ea rona e tlisoa ke khotsofalo ea bareki ba rona ho fapana le hore na re fumana chelete e kae.Sehlopha sa rona se tla etsa hantle ho lumellana le litlhoko tsa hau kamehla.
"Boleng ba pele, Botšepehi e le motheo, ts'ebeletso e tšepahalang le phaello e kopanetsoeng" ke mohopolo oa rona, molemong oa ho nts'etsapele le ho phehella bokhabane bakeng sa Moralo o tummeng oa China Engineering Portable Pile Driver, Hydraulic Water Well Rotary Drilling/Drill Rig, Re hahile botumo bo tšepahalang har'a bareki ba bangata.Boleng le moreki ke lintho tseo re li batlang kamehla.Ha re qenehele boiteko bo matla ba ho etsa lihlahisoa tse betere.Lebella tšebelisano ea nako e telele le melemo e kopanetsoeng!
"Boleng ba pele, Botšepehi e le motheo, tšebeletso e tiileng le phaello e kopanetsoeng" ke mohopolo oa rona, e le hore re ntlafatse ka ho tsoelang pele le ho phehella bokhabane bakeng saMechini ea Kaho, Ho cheka Seliba sa Metsi ka Rotary, Mechini eohle e tsoang kantle ho naha e laola le ho netefatsa ho nepahala ha machining bakeng sa lintho.Ntle le moo, re na le sehlopha sa basebetsi le litsebi tsa taolo ea boleng bo holimo, ba etsang thepa ea boleng bo holimo mme ba na le bokhoni ba ho hlahisa thepa e ncha ho atolosa lehae la rona la mmaraka le kantle ho naha.Re lebelletse ka tieo hore bareki ba tle bakeng sa khoebo e atlehileng bakeng sa rona ka bobeli.
Likarolo le Melemo
Gookma rotarymochini oa ho phunyae kenyelletsa mahlale a mangata a mantlha, e etella pele mokhoa oa mochini oa liqubu o mahareng le o monyane.
1. Ho Lahlela Seretse ka Lebelo le Leholo
Ts'ebetso ea ho lahla seretse ka lebelo le holimo e bonoa ka moralo o ikhethang oa hlooho ea matla.
Ka bobeli matla a matla le lebelo le phahameng, e fumana melemo e mengata maemong ohle a ho sebetsa, katleho ea ho sebetsa e phahame ka 20% ho feta lihlahisoa tse ling.
2. Ponahalo ea Mochini oa Batho
Ka sebopeho sa mochini oa motho, tlhaiso-leseling ea hae kapa maemo a ho sebetsa a bonoa, ho etsa hore ts'ebetso e otlolohe ebile e bonolo.
Likarolo tsa mantlha li na le litlhophiso tsa tieho ea nako, li etsa hore ts'ebetso e be bonolo haholoanyane, e fokotsa likarolo tse tšosang, le ho lelefatsa bophelo ba mochini.
3. Tlhokomelo e Bonolo le Tokiso
Moralo oa electromechanical, o etsa hore mochini o be bonolo ho lokisoa le ho lokisoa, bopaki ba metsi le bo bolokehileng, le ts'epahalo e phahameng.
4. Moralo o tsoetseng pele
Mochine o hlahisoa ke software e tsoetseng pele ea moralo le software ea tlhahlobo ea matla, e ka bonts'a ka kotloloho sebaka sa tlhahlobo ea khatello ea maikutlo sa sebopeho sa sehlahisoa, e le ho ntlafatsa sebopeho sa sehlahisoa.
5. Tshireletso Tshebetso
Ts'ebetso ea synchronous ea thapo ea ho khutla, thibela ho beha lisebelisoa tsa ho cheka ka phoso.Molamu oa boro o na le sesebelisoa sa anti punching, se nang le ts'ebetso ea setšoantšo se ka morao.
6. Agile Mobility
Moetso oa Gookma GR50 le GR60 rotary rig ea ho cheka ke sebopeho se kopaneng, boholo bo bonyenyane, motsamao o bonolo, o loketseng ka ho khetheha bakeng sa ho tsamaisa le ho sebetsa libakeng tse moqotetsane le tse tlase, joalo ka kaho ea matlo a mahaeng, ho cheka liliba tsa metsi le morero oa alley joalo-joalo.
7. Katleho ea Moruo
Lebelo le potlakileng la ho sebetsa, bophelo bo bolelele ba likarolo, sekhahla se tlase sa tokiso, tšebeliso e tlase ea mafura, e etsa hore mochini o be le katleho e phahameng ea moruo.
8. Phano e potlakileng
Sistimi ea tlhahiso ea litsebi e netefatsa boleng bo felletseng le phano e potlakileng ea mochini.
Lisebelisoa
Gookma rotary drilling rig e sebelisoa haholo mererong e mengata ea kaho ea likoti, joalo ka tsela e kholo, seporo, nosetso, borokho, phepelo ea motlakase, puisano, masepala, serapa, ntlo, kaho ea liliba tsa metsi joalo-joalo, 'me esale e natefeloa ke botumo bo phahameng har'a bareki.
Mohala oa Tlhahiso
latela konteraka”, e tsamaellana le tlhokeho ea mmaraka, e kenelletseng nakong ea tlholisano ea mebaraka ka boleng ba eona bo holimo hape e fana ka litšebeletso tse felletseng le tse ikhethang bakeng sa bareki ho ba lumella ho fetoha bahloli ba bohlokoa.Ho phehella khoebo, ka 'nete ke thabo ea bareki bakeng sa OEM China China Rotary Crawler Mounted Hydraulic Surface Down-The-Hole Drilling Rig Rotary, Lintho tsa rona li rometsoe Amerika Leboea, Europe, Japan, Korea, Australia, New Zealand, Russia. le linaha tse ling.Ke lebelletse ho etsa tšebelisano e ntle le e tšoarellang nako e telele le uena molemong o tlang!
OEM ChinaChina DTH, Rig ea ho cheka, Re ikemiselitse ho aha lebitso le tummeng le ka susumetsang sehlopha se itseng sa batho le ho khantša lefatše lohle.Re batla hore basebeletsi ba rona ba hlokomele ho itšepa, ebe ba fumana tokoloho ea lichelete, qetellong ba fumane nako le tokoloho ea moea.Ha re tsepamise maikutlo tabeng ea hore na re ka etsa leruo le le kae, ho e-na le hoo re ikemiselitse ho fumana botumo bo phahameng le ho tsebahala ka thepa ea rona.Ka lebaka leo, thabo ea rona e tlisoa ke khotsofalo ea bareki ba rona ho fapana le hore na re fumana chelete e kae.Sehlopha sa rona se tla etsa hantle ho lumellana le litlhoko tsa hau kamehla.
video
● Agile Mobility
● Boholo bo Nyenyane ba ho Sebetsa Libakeng tse Moqotetsane
● Bakeng sa ho Cheka Seliba sa Metsi le Ntlo ea Motheo oa Ntlo
● Botebo ba ho Cheka 12m (40ft)
1.The GR50 rotary drilling rig ke ea moralo o mocha, sebopeho se kopaneng, .ka chebahalo e ntle ka kakaretso.
2.Small boholo, agile motsamao, ho loketse bakeng sa lipalangoang, loketseng bakeng sa ho sebetsa libakeng tse moqotetsane le tlaase tse kang alley, kotopo, ka tlas'a lefatše, ka tlung joalo-joalo.
3.Equips e nang le enjene e tsebahalang e nang le lebitso, e na le matla a matla, a tsitsitseng, tšebeliso e tlaase ea mafura, lerata le tlaase, ho boloka matla le ho sireletsa tikoloho.
4..E amohela tsamaiso e ntle ea hydraulic, botsitso bo phahameng, ha ho na ho lutla, torque e kholo le bokhoni bo phahameng.
5. E loketse maemo a fapaneng a sebaka le mobu joalo ka lera la lehlabathe la phallo, stratification ea silt le metsi a fatše joalo-joalo, e fihlela litlhoko tse fapaneng tsa kaho.E ka cheka lejoe le omeletseng, ka tsela e omileng le ka mokhoa o metsi o ka sebelisoang.
6. Ts'ebetso e tsitsitseng, botšepehi bo phahameng, tekanyo e tlaase ea ho senyeha, tlhokomelo e bonolo le ho lokisoa.
| Lebitso | Rotary Drilling Rig | ||
| Mohlala | GR50 | ||
| Enjene | Mohlala |
| YC4GB85-T22 |
| Matla | Kw/rpm | 61/2200 | |
| Sistimi ea Hydraulic | Mohlala oa pompo o ka sehloohong |
| K3V63DT |
| Khatello e phahameng | Mpa | 32 | |
| Pressurizing System | Matla a maxpressurizing | KN | 140 |
| Matla a ho hula a maholo | KN | 140 | |
| Pressurizing cylinder stroke | mm (ka) | 1500 (59.1) | |
| Hlooho ea Matla | Ho falla ha likoloi | ml/r | 107*1 |
| Torque e kholo ea tlhahiso | Kn.m | 50 | |
| Lebelo la ho sebetsa | rpm | 22 | |
| Ho lahlela seretse ka lebelo le phahameng | rpm | 65 | |
| Khase | Bophara ba poleiti ea Crawler | mm (ka) | 500 (19.7) |
| Bolelele ba chassis | mm (ka) | 2800 (110.4) | |
| Lebelo la ho tsamaya | limithara (maft) /h | 3200 (10500) | |
| Moetso oa makoloi a tsamaeang |
| TM18 | |
| Mast | Tshekamelo ya ho le letshehadi le le letona | tekanyo | ±5˚ |
| Tshekamelo ya pele | tekanyo | 5˚ | |
| Ho sekamela ka morao | tekanyo | 90˚ | |
| Winch e ka sehloohong | Moetso oa motlakase |
| TM22 |
| Matla a phahameng a phahamisang | KN | 120 | |
| Wirerope bophara | mm (ka) | 20 (0.79) | |
| Bolelele ba terata | m (maft) | 20 (65.6) | |
| Ho phahamisa lebelo | limithara (maft)/min | 85 (278.8) | |
| Winch e thusang | Matla a phahameng a phahamisang | KN | 15 |
| Wirerope bophara | mm (ka) | 12 (0.47) | |
| Bolelele ba terata | m (maft) | 22 (72.2) | |
| Ho phahamisa lebelo | limithara (maft)/min | 40 (131.2) | |
| Kopa Pipe | Locking Pipe | mm (ka) | ø273 (10.8) |
| Lintlha tsa Ts'ebetso | Botebo bo phahameng ba ho phunya | m (maft) | 12 (39.4) |
| Boholo ba bophara ba ho phunya | m (maft) | 1.0 (3.3) | |
| Lipalangoang | Bolelele*Bophara*Bophahamo | m(ft) | 5.5*2.2*2.9(18.1*7.3*9.6) |
| Boima ba 'mele | kg (lb) | 11500 (25360) | |
| Li-parameter li ka fetoha ntle le tsebiso ea pele. | |||
video
1.The GR60 rotary drilling rig ke ea moralo o mocha, sebopeho se kopaneng, .ka chebahalo e ntle ka kakaretso.
2.Small boholo, agile motsamao, ho loketse bakeng sa lipalangoang, loketseng bakeng sa ho sebetsa libakeng tse moqotetsane le tlaase tse kang alley, kotopo, ka tlas'a lefatše, ka tlung joalo-joalo.
3.Equips e nang le enjene e tsebahalang e nang le lebitso, e na le matla a matla, a tsitsitseng, tšebeliso e tlaase ea mafura, lerata le tlaase, ho boloka matla le ho sireletsa tikoloho.
4..E amohela tsamaiso e ntle ea hydraulic, botsitso bo phahameng, ha ho na ho lutla, torque e kholo le bokhoni bo phahameng.
5. E loketse maemo a fapaneng a sebaka le mobu joalo ka lera la lehlabathe la phallo, stratification ea silt le metsi a fatše joalo-joalo, e fihlela litlhoko tse fapaneng tsa kaho.E ka cheka lejoe le omeletseng, ka tsela e omileng le ka mokhoa o metsi o ka sebelisoang.
6. Ts'ebetso e tsitsitseng, ho tšepahala ho phahameng, ho senyeha ho fokolang, tlhokomelo e bonolo le ho lokisa.
| Lebitso | Rotary Drilling Rig | ||
| Mohlala | GR60 | ||
| Enjene | Mohlala |
| YC4A125Z-T21 |
| Matla | Kw/rpm | 92/2200 | |
| Sistimi ea Hydraulic | Mohlala oa pompo o ka sehloohong |
| K3V63DT |
| Khatello e phahameng | Mpa | 32 | |
| Pressurizing System | Matla a phahameng a hatellang | KN | 140 |
| Matla a ho hula a maholo | KN | 140 | |
| Pressurizing cylinder stroke | mm (ka) | 2500 (98.5) | |
| Hlooho ea Matla | Ho falla ha likoloi | ml/r | 80+80 |
| Torque e kholo ea tlhahiso | Kn.m | 60 | |
| Lebelo la ho sebetsa | rpm | 22 | |
| Ho lahlela seretse ka lebelo le phahameng | rpm | 65 | |
| Khase | Bophara ba poleiti ea Crawler | mm (ka) | 500 (19.7) |
| Bolelele ba chassis | mm (ka) | 3650 (143.8) | |
| Lebelo la ho tsamaya | limithara (maft) /h | 3200 (10500) | |
| Moetso oa makoloi a tsamaeang |
| TM22 | |
| Mast | Tshekamelo ya ho le letshehadi le le letona | tekanyo | ±5˚ |
| Tshekamelo ya pele | tekanyo | 5˚ | |
| Ho sekamela ka morao | tekanyo | 90˚ | |
| Winch e ka sehloohong | Moetso oa motlakase |
| TM40 |
| Matla a phahameng a phahamisang | KN | 180 | |
| Wirerope bophara | mm (ka) | 20 (0.79) | |
| Bolelele ba terata | m (maft) | 33 (108.3) | |
| Ho phahamisa lebelo | limithara (maft)/min | 85 (278.8) | |
| Winch e thusang | Matla a phahameng a phahamisang | KN | 20 |
| Wirerope bophara | mm (ka) | 12 (0.47) | |
| Bolelele ba terata | m (maft) | 33 (108.3) | |
| Ho phahamisa lebelo | limithara (maft)/min | 40 (131.2) | |
| Kopa Pipe | Locking Pipe | mm (ka) | ø273 (10.8) |
| Lintlha tsa Ts'ebetso | Botebo bo phahameng ba ho phunya | m (maft) | 16 (53)/3 liphaephe tsa karolo |
| 21(69)/4 liphaephe tsa karolo | |||
| Boholo ba bophara ba ho phunya | m (maft) | 1.2 (4.0) | |
| Lipalangoang | Bolelele*Bophara*Bophahamo | m(ft) | 9.2*2.4*3.15(30.2*7.9*10.4) |
| Boima ba 'mele | kg (lb) | 15000 (33070) | |
| Li-parameter li ka fetoha ntle le tsebiso ea pele. | |||
1.The GR80 rotary drilling rig ke ea moralo o mocha, sebopeho se kopaneng, .ka chebahalo e ntle ka kakaretso.
2.Equips e nang le enjene e tummeng ea brand, e na le matla a matla, a tsitsitseng, a tlaase a sebelisoang ke mafura, lerata le tlaase, ho boloka matla le ho sireletsa tikoloho.
3..E amohela tsamaiso e ntle ea hydraulic, botsitso bo phahameng, ha ho na ho lutla, torque e kholo le bokhoni bo phahameng.
4. E loketse maemo a fapaneng a sebaka le mobu joalo ka lera la lehlabathe la phallo, stratification ea silt le metsi a fatše joalo-joalo, e fihlela litlhoko tse fapaneng tsa kaho.E ka cheka lejoe le omeletseng, ka tsela e omileng le ka mokhoa o metsi o ka sebelisoang.
5. Ts'ebetso e tsitsitseng, ho tšepahala ho phahameng, ho senyeha ho fokolang, tlhokomelo e bonolo le ho lokisa.
6.Motlakase oa moea o ka sehloohong ke oa ho kopana ha litsela tse peli, ho phahamisa le ho theoha tlaase ho potlakile ebile ho sebetsa hantle,
ho fokotsa nako ea ho sebetsa le ho eketsa katleho.
7. Sebelisa poleiti ea tšepe e phahameng ea tsitsipano, eketsa matla a mochine oohle 'me ho joalo
tshebetso.
| Lebitso | Rotary Drilling Rig | ||
| Mohlala | GR80 | ||
| Enjene | Mohlala |
| YC6J180L-T21 |
| Matla | Kw/rpm | 132/2200 | |
| Sistimi ea Hydraulic | Mohlala oa pompo o ka sehloohong |
| K3V112DT |
| Khatello e phahameng | Mpa | 32 | |
| Pressurizing System | Matla a phahameng a hatellang | KN | 240 |
| Matla a ho hula a maholo | KN | 240 | |
| Pressurizing cylinder stroke | mm (ka) | 3000 (118.2) | |
| Hlooho ea Matla | Ho falla ha likoloi | ml/r | 107+107 |
| Torque e kholo ea tlhahiso | Kn.m | 85 | |
| Lebelo la ho sebetsa | rpm | 22 | |
| Ho lahlela seretse ka lebelo le phahameng | rpm | 65 | |
| Khase | Bophara ba poleiti ea Crawler | mm (ka) | 600 (23.6) |
| Bolelele ba chassis | mm (ka) | 4550 (179.3) | |
| Lebelo la ho tsamaya | limithara (maft) /h | 3200 (10500) | |
| Moetso oa makoloi a tsamaeang |
| TM60 | |
| Mast | Tshekamelo ya ho le letshehadi le le letona | tekanyo | ±5˚ |
| Tshekamelo ya pele | tekanyo | 5˚ | |
| Ho sekamela ka morao | tekanyo | 90˚ | |
| Winch e ka sehloohong | Moetso oa motlakase |
| TM40 |
| Matla a phahameng a phahamisang | KN | 240 | |
| Wirerope bophara | mm (ka) | 26 (1.03) | |
| Bolelele ba terata | m (maft) | 43 (141.1) | |
| Ho phahamisa lebelo | limithara (maft)/min | 85 (278.8) | |
| Winch e thusang | Matla a phahameng a phahamisang | KN | 70 |
| Wirerope bophara | mm (ka) | 12 (0.47) | |
| Bolelele ba terata | m (maft) | 33 (108.3) | |
| Ho phahamisa lebelo | limithara (maft)/min | 40 (131.2) | |
| Kopa Pipe | Locking Pipe | mm (ka) | ø299 (11.8) |
| Lintlha tsa Ts'ebetso | Botebo bo phahameng ba ho phunya | m (maft) | 26 (85.3) |
| Boholo ba bophara ba ho phunya | m (maft) | 1.2 (4.0) | |
| Lipalangoang | Bolelele*Bophara*Bophahamo | m(ft) | 12*2.8*3.45(39.4*9.2*11.4) |
| Boima ba 'mele | kg (lb) | 28000 (61730) | |
| Li-parameter li ka fetoha ntle le tsebiso ea pele. | |||
LIHLAHISO TSE HLAHANG
-
Theko ea Morei China Matla a Manyane a Phahameng a sebetsang hantle haholo...
-
10 tonne diesel telescopic cylinder Horizontal di...
-
Hot Sale for Hot Sale 26 meter Crawler Rotary A...
-
100% Tšimo ea Pele ea Multi-Function le Serapa sa M...
-
Mini Small Paddy Rice Milling Husker Rice ...
-
Moqapi o ka Tsosolosoang bakeng sa 6m3 8m3 9m3 10m3 12m3 16m3...
